Machine Parts ~ Misc.
Like to find, those hard to find Machine parts? or?
Wanted Ads are a FREE SERVICE of woodmachines.
Ads, currently, run 3 months. Limit 4 lines and 4 ads per customer.
To place an ad in this category:
· Go the Order Page, place your ad, and check "This is a Free Ad". 
Please Note: Maximum ad length (free ads) is 4 lines.
*If you have found good benefit from your ad, or from a sale and would like to support this service, I do accept gratuities through PayPal or by Mail.
A&A Woodworking Machinery Classifieds               Home
Place a "For Sale Until Sold" Ad* 4 lines $22/for up to a year. Photos $12.
Please place a Wanted Ad (A free Service, Ads run for 3 months)
If you don't find the Machine you need, or would like to locate those hard to find parts for a machine.
Other free Services include; Help Wanted  
Machinery
Saws , Jointers & Planers, Shapers & Moulders, Drilling & Boring, Lathes, Sanders, Routers, Edgebanders, Lasers
Dust Collectors, Presses & Clamps, Sharpening Equipment, Multi-Purpose Machines, Tenoners & Mortisers, Compressors,
Kilns, Finishing & Painting, Sawmills and Primary Forestry Machinery , Other Machines (not classified above)

Trunion for Craftsman King-Seeley 8 inch Bench Saw, Model 103.23831. Need Front Trunion Part #37422. Gainesville, FL, US.dshome0@44gmail.com (Don) {G21703001) See Anti-Spam Code  
Looking for info Shopmate 5200T3, Help,  what chuck fits the 20,000 rpm mandrel, and or purchase. Farnborough, Hampshire, England. chrisvince@btopenworld.com (Chris) {G21703002}

Broad Garrett  J170 Parts.  Need tool rests, faceplates, belt door cover, anything useful to restore my lathe. Peckville, PA, US.  lbz53@verizon.net (Gene) {E21903002}
.
Part for an older Craftsman Drill Press, Model# 10323141. Need a motor support ass'y, part #18920. Thank You. Canton, NY, US. Danimal2843@44aol.com (Harlow) {K30703010}
See Anti-Spam Code  
A Belt for an AMT 4800 Jointer. Etowah, NC, US. geepop@bellsouth.net (Frank) {N60403004}
.

Manual for a Newman BA100 Horizontal Drilling Machine. Thanks. Napanee, Ont, Canada. rick31797@yahoo.com (Rick) {N60403003}

Motor for a Craftsman 10'' Table Saw, model #113.299210 any help or info would be appreciated. Arvada, CO, US. dlhinteriors@qwest.net (Duane) {N60403002}
Parts for Powermatic E-16 16" Planer.
Culloden, GA, US. kercetruss@Attglobal.net 
(Johnny) {N60403001}
.

Looking for an operators manual for a MOAK 36" Bandsaw, 5hp 3ph. Or any Manual for a MOAK bandsaw would help. Fairhope, AL, US. wxpotts@mindspring.com (Bill) {G52603004}
Looking for an operators manual for a MOAK 36" Bandsaw, 5hp 3ph. Or any Manual for a MOAK bandsaw would help. Fairhope, AL, US. wxpotts@mindspring.com (Bill) {G52603004}

Looking for steady rest for a gap bed wood lathe. Springfield, MA, US. ajtools1@netzero.net (A.J.) {C51703008}
.
Original fence system for a Walker Turner cabinet shaper model #S975, 50'S vintage, and the motor pulley guard. Thanks. Springfield, MA, US. ajtools1@netzero.net (A.J.) {C51703007}

  Need handle assembly for Delta 36-220 miter saw ser.#9146. East Bernard, TX, US.
jollyroger@ev1.net (Roger) {C51703005}  
Need trigger switch for Powr-Kraft TPC2610 Radial Arm Saw. Orr, MN, US. jskat@fnbcnet.com (Jim) {C51703004}

Need parts for a Delta model 31-730 6" belt/12" disc sander. Belt table with trunnion mount/guide, side & top guard.  {C51703003}
FOUND
Motor Cover for a Delta 12-14 Table Saw; the rounded bulbous cover, not the boxy square one. PA Furnace, PA, US. dhwelsch@pennswoods.net (David) {C51703002} 

Drive belt for a Miller Falls Belt Sander Cat. #830 Model C, or part# for same. Hopkins, S.C, US. jamesahewett@aol.com (James) {C51703001}
.
Operating manual or copy for a Rockwell/Delta  10" Radial Arm Saw. Model 33-790. Washougal, WA, US. michael@44markupandprofit.com (Michael) {A51003006} See Anti-Spam Code  
Yoke Stud for Delta 33-890 Radial Arm Saw.part # 424021110017 or dimensions for one. Harvard MA, US. lee77@44charter.net (Mike) {A51003005}
 See Anti-Spam Code  
Looking for fence stop plunger assembly, and knobs for Powermatic model 60 Jointer.
jimdiannekrause@cox.net (Jim) {A51003004}
.

Rip Fence, Pin motor and owners manual for a Sears Craftsman 7 1/2" table saw model # 113 241601.  rogermiller@44peoplepc.com (Roger) {A51003002} See Anti-Spam Code  
Need cover for a Sears Craftsman 12-inch band saw, model 113.24350. PN 69069. Alachua, FL, US. wrechst@hotmail.com (Willy) {A51003001}
.

Rockwell Uni-Saw Parts need motor cover, front access door, motor, motor pulley. La Grange, CA, US. qualityremains@yahoo.com (David) {K31603004}
Part for a Craftsman Table Saw, models 113.299130 or 113.29931. Need a Front Trunnion part #62099.  La Grange, CA, US. qualityremains@yahoo.com (David) {K31603003}

Part for Atlas Scroll Saw Model 4020.  
Part holds upper saw blade.  Henderson, NV, US. jaymeanddave@yahoo.com (Jayme) {K31603002}
.
12' Lower Wheel for an Atlas 912 Bandsaw. 
Must be true.  Tire not necessary. Los Angeles, CA, US. ac6aj@44arrl.net (Lee) {K31603001}
See Anti-Spam Code  

Lock Nut for Craftsman Router mod. 315.17380   part #1-623793-01. Franklin, OH, US. jjwmkw@msn.com (Jim) {K31003004}
.
Saw Guard for a Shop Smith Mark V Table Saw either with or without the dust collector. Cumberland, ME, US. evtvted@maine.rr.com (Miles) {K31003003}

Looking for parts for Delta super 900 Radial Arm Saw, manufactured by Rockwell mfg company. Chicago, IL, US. llcoles@comcast.net (Les) {K31003002} 
.
Looking for parts and manuals for and old Shopsmith / Magna Model 10E / 10ER  with an exposed motor and only one set of tubes. Portland, OR, US. Woodmachines@LeachFamily.com (Quin) {K30703018}

Parts for a Delta DP 220 Drill Press. Looking for a On/Off Switch, switch box and mount brackets, paint info, for late 1930's/early 1940's drill press.  Huntington, NY, US. WPed@AOL.com (William) {K30703016}
Looking for a headstock pulley for a Delta Wood Lathe model 46-111  part # 926 04 991 5610. Havelock, NC, US. jcoms63154@44aol.com (John) {K30703015} See Anti-Spam Code  
.

Looking for the owners manual for a sears Planer model # 103.1801 Thanks. Lady Lake, FL, US.  rossbotics46@comcast.net  (Doug) {K30703014}
.
.
220v. motor for 12" Craftsman Floor saw, Model # 113.29931. Apparently the same motor is also used on 12" Radial Arm 1970's era. Langley, BC, Canada. dflundstrom@44shaw.ca or call 604-532-7404. (Dennis) {K30703013} See Anti-Spam Code  

Need an owners manual or copy for a Montgomery Ward bench top mortising machine. Id plate missing. Zanesville, IN, US. tprosuper@aol.com (Tom) {K30703012}
Looking for a Trigger Switch for a 10" Radial Arm Saw made by Wards Powr-Kraft. Chatham, MI, US. uptodaup@44tds.net (Tom) {K30703011}
See Anti-Spam Code  

Part for an older Craftsman Drill Press, Model# 10323141. Need a motor support ass'y, part #18920. Thank You. Canton, NY, US. Danimal2843@44aol.com (Harlow) {K30703010}
See Anti-Spam Code  
Motor for Delta 36-600 Table Saw. 
Part# is 1313314. Conroe, TX, US.   dkendall@txucom.net (R.A.) {K30703009}
.
.

Table for the 6" Rockwell/Delta belt/disc Sander, Model 31-710. Brookville, KS. US. mcstocks@44wwwebservice.net (Steve) K30703008}
See Anti-Spam Code  
Parts list and any information on a Craftsman Lathe model # 101.06260 manufactured by Atlas. Englewood, FL, US. woodart631@aol.com ( Carroll) {K30703006}

Owner's manual or a copy for a Duracraft 16 speed Drill Press Model # 45161. Houston, TX, US. darryl1023@44ev1.net (Darryl) {K30703005}
See Anti-Spam Code  
Long Rails for Delta Table Saw model 34-444, 
the old round rails. Mansfield, TX, US. RandyR@RRenergywise.com or call 682-518-1659. (Randy) {K30703003} 

Upper and lower guides for a Wadkin 20" Bandsaw also need blade guard and fence. Perth, ON, Canada. historichousefitters@canada.com (Steve) {J32703009}
Cope tooling for a Powermatic 2a Tenoner. Profiled or straight cutters. Coventry, CT, US. scmarshall@snet.net (Steve) {J32703008}
.

Need parts for Powermatic Lathe Model 45. Avon, IN, US. mjoppy@aol.com (Mike) {J32703007}
Reversible Fans 50k cfm for wood seasoning Kilns. Delhi, India.  vp@kaushals.com (VP) {J32703006} 

Parts for a j-line j-170 wood lathe. Looking for a 6"faceplate #tr-527, 12"tool rest #-tr-859 and 3" rosette chuck #50l-267.  lbz43@44aol.com (Gene) {J32703005} See Anti-Spam Code  

Part for a 1965 Delta Rockwell  8" Jointer, 37-315. Need Main fence casting needed. The original part number is 418-04-043-5001. Poway, CA, US. bretgreen@cox.net (Bret) {J32703006}
Fence for Delta Unisaw (short) not extended version can be delta or another brand. Raleigh, NC, US. volcanodesign@msn.com (Audiowood?) {J32703004}

Looking for the knife sharpening attachment for the 18" Delta wedge Thickness Planner. Northport, NY, US. support@44widom-assoc.com (Steve) {J32703003} See Anti-Spam Code  

Operators manual for Montgomery Ward 12.5 ton wood splitter with 8hp B/S engine. Tahlequah, OK, US. lrmccall@44cablelynx.com (Lloyd) {J32703002} See Anti-Spam Code  
Need guard and guard spring for Shopmaster 6" Jointer 1953 Vintage Model JO-400. Elkins, WV, US. seldersr@dne.edu  or call 304/637-1253. (Ron) {J32703001}

Instruction manual or op info. for a Craftsman router Pantograph, mode l 25187?. Thank you. Sioux City, IA, US. dflan1@aol.com (Richard) {I32403006}
14" Oliver table saw arbor brake assembly - brake cable for type CTX saw. 3HP, 240V,3PH. Ser.#9255439004. Tyrone, PA, US. mspewock@iup.edu (Mike) {I32403005}

Parts for an Atlas 10" tilting arbor Table Saw.  I need the rip fence and rails and the guard assembly.  No model # on the saw.  Goldsboro, NC, US. isright@earthlink.net (Larry) {I32403004}
1/2" shaper spindle for 43-502 Rockwell/Delta Overarm Router/Shaper. Also need guide pins. Marana, AZ, US.  thumbpick51@44earthlink.net (Ray) {I32403003} See Anti-Spam Code  

Looking for a tensioner assy for a Craftsman Bandsaw, model 113.24350. Need the Upper wheel support Bracket, PN 41426. Dahlonega, GA, US. skruzich@linkamerica.net (Steve) {I32403002}
16 speed Drill Press Lift Spring for model number 45161. This is the spring that lifts the spindle. Des Moines, IA, US.   {I32403001} 
FOUND

Owners/Operators manual for Atlas Power King 18" Scroll/Jig Saw, model 4011. Tewksbury, MA, US. deathwish2@44comcast.net (Mark) {I31803007}
See Anti-Spam Code  
Dust door for a Delta/Rockwell shaper. This same type of louvered dust door fits the Unisaw. Pico Rivera, Ca, US. salgarcia@hotmail.com (Sal) {I31803004}

Operators manual for elect. Jockey Headsaw Sharpener. Lowell, IN, US. PRGerst39@aol.com (Paul) {I31803003}
.
Manual for a DeWalt / Black & Decker 7740 Radial Arm Saw. Original, copy or scanned copy. Thanks! Erie, CO, US. mimdesign@44msn.com (Brian) {I31803002}

Spindle for Walker Turner Bench bench top Drill Press. 5/8" dia., 17" long,6 splines,  33jt taper for Jacobs 6A chuck. Fishkill, NY, US. jemee22@44aol.com (Everett) {I31803001}
 See Anti-Spam Code  
Owners Manual for a Craftsman 8" Table Saw Model #113.24281 Mid 60's model. original or copy.  El Dorado Hills, CA, US. jeffphonefixer@44comcast.net (Jeffrey) {I30703004}
.

Info and parts for aPowerMatic Woodlathe, Model 45. Need manual, tailstock and tool rest base. Sea Isle City, NJ, US. mdelany@44mail.plexi.com (Mark) {I30703003}  See Anti-Spam Code  
Info and/or owner's manual for a 16" Walker Turner Metal/Wood Band Saw. Norman, OK, US. ksievers@ou.edu (Karl) {I30703001}
.

Owners manual or copy of for older Craftsman Tablesaw Model #113.29990. Chino, CA, US. msilverthorne@44boydcorp.com (Michael) {I30103015}  See Anti-Spam Code  
.
Parts for a Wards Radial arm saw. Model TPC 2610A - Need Exhaust tube for blade shield p/n 28-124 Plus anti-kickback rod ass'y p/n 25-362. Machesney Park, IL, US. bpeters198@excite.com (Bill) {I30103013}
Need a blade guard assembly for a Delta six inch jointer, model 37-600 part #413-94-354-001. Thanks. West Des Moines, IA. US. rpbell@peoplepc.com (Bob) {I30103011}
Owners manual for Duracraft bench Bandsaw Model # BBS 412. San Antonio, TX, US. rwells1@satx.rr.com (Roberta) {I30103010}
.
Service manual for ShopSmith bandsaw, ~ 10 years old. Effingham, IL, US. harib@effingham.net (Harry) {I30103008}
.

Need a elevating crank handle for a 10" Wards Radial Arm Saw, model no. TPC - 2610B. Handle usually made of cast iron. Pflugeville, TX, US. mmokri65@hotmail.com (Moh) {I30103006}

Switch and operators/parts manuals for a Wards PowerKraft Radial arm saw, model TPC2610A10, or copies of manuals. Chadwick, IL, US. jacobs@essex1.com (David) {I30103003}
Delta Quick-change lathe tool rest holder. Helena, MT, US. jlynch@state.mt.us (Jack) {I30103002}
.
.

Safety switch/key for the trigger handle on a Mongomery Wards Power-Kraft 10" radial arm saw. Model #2610. Vancouver, WA, US. windlover@juno.com (Kevin) {H33103006}
Parts & Manual for Shopmate Sabre-Lathe, mod.#2610td. Benton Harbor, MI, US. gmdale3@44yahoo.com (Dave) {H33103005}
See Anti-Spam Code  

Owners manual for a Sears craftsman 12" Bandsaw Model# 113 243401. Dyess Air Force Base, TX, US. jaycarver@juno.com (Jay) {H33103003}
Manual for a Powr-Kraft Jointer, model THS 2424 . Massena, NY, US. friarhead@44aol.com (Marty) {H33103002} See Anti-Spam Code  

Info and/or owner's manual for a 16" Walker Turner Metal/Wood Band Saw. Norman, OK, US. ksievers@ou.edu (Karl) {I30703001}
.
Duracraft Table Saw parts, Model TSC-10. Need bearings, bearing retainers and table insert plate. Khan, NM, US. GN236@aol.com (A.Ron) {G30703006}

Montgomery Ward Radial Arm saw or parts for one. Woodinville, WA, US. richard.f.lange@boeing.com (Dick) {G30703005}
.
Fence for an SCMI  T130 or larger Shaper or a parts machine. DeKalb, IL, US. loktr@aol.com or call 815-758-6534 (Ben) {G30703003}
.
Owners manual for a Craftsman Jointer, 
Model # 103.23900. Will pay copying and mailing expenses. Thanks. Green Bay, WI, US. wcseleen@hotmail.com (Bill) {G30703001}
.
Parts for a Makita Jointer Combination Planer. Old large model, no numbers available. I need gripping rollers for planer. Thanks. Santa Cruz, CA, US. tonyrb@cruzio.com or call 831-458-3798 (Tony) {G30203013}

Manual and parts for a PowerMatic Woodlathe, model 45. Signal Mountain, TN, US. gmccorke@bellsouth.net (Glenn) {G30203011}
.
Rip Fence for a Montgomery Ward 8" Bench Saw, Model 25TCG3475A. Wedowee, AL, US. joe@acsisp.com or call 2356-357-4125, ( Joe) {G30203010}

Tables for older Powermatic Combination Belt and Disc Sander, Model 30. Also would be interested in the belt guard. Denver, CO, US. valanddana@frii.com (Val) {G30203009}
Parts for an Atlas/Craftsman 6" lathe model 101.070301. Looking for a crossfeed ball crank and a tailstock ram lock lever.  Houston, TX, US. rtaylor@morandirect.com ( Ron) {G30203005}
Parts for a Westcraft Drill Press, made by Western Auto (late 40's - 50's maybe).  Need a Spindle Return Spring. Houston, TX, US. rtaylor@morandirect.com ( Ron) {G30203004}

Parts or catalogue for a Broadhead-Garrett J-Line Band Saw. Only # on unit 2082. Thanks. Kenai Penninsula Borough School District. Homer, AK, US. bsimcoe@kpbsd.k12.ak.us (Bob) {F31203001}
Part for Craftsman Drill Press model 103.23130. Need Spindle Assembly - part #27130. Oklahoma City, OK, US. dan@44looperleather.com (Dan) {F31203002}  See Anti-Spam Code
Guard for a Shopmaster 6" Jointer. 1953 vin. shopmaster -not "delta Shopmaster". K.C. MO, US. jbeith@44kc.rr.com (Jeff) {F30903006}
See Anti-Spam Code
On/off switch for PowerKraft 10" Radial Arm Saw. Model TPC2610. Northglenn, CO, US. lorenmartin@attbi.com (Loren) {F30903005}
.
.

Part and info for a Wards Power-Kraft  Saber Saw. Need a power switch, and an electrical diagram, model no. TPC-8933A, serial # 8SK. Jonesboro, GA, US. ssore@44earthlink.net (Ross) {F30903004}
See Anti-Spam Code
Atlas press Co. 10 inch tilting arbor  Bench Saw, 
for parts or complete. Mississauga, ON, Canada. mike@olastreet.com (Mike) {F30903003}
.
.
Looking for owners manuals or copies for  Craftsman - 6” Jointer 113.20621, - 10” Radial Arm Saw 113.29441, - 12” Table Saw 113.29950, and Shaper 113.23940. Salina, KS, US. rpedersen1@cox.net (Randy) {F30903002}

Power Switch for Powr-Kraft 9" radial arm saw model TPC-2323A (ca 1964). Switch made by Cutler-Hammer. Edina, MN, US.  {F30903001} 
FOUND 
.
Motor assembly for a Craftsman 12" Radial Arm Saw. complete. 1975-76 vintage. 120v or 220v  1 ph  Covington, KY, US.  rstaubach@insightbb.com or call 859-291-4000. (Bob) {F30103001}
.

Looking for a complete tailstock for a Powermatic 45. Reasonably priced.  Thank you. Sylvania, OH, US. pro-graf@msn.com (Pete) {E32903004}
Hopper feeder for a Moulder,  Little valley, NY, US. fivepnts@44eznet.net (Larry) {E32903004}
See Anti-Spam Code

Need an armature for a Sears Craftsman Router. Model No. 315.17480, part no. 2-606492-01. Helena, MT, US. drew31@msn.com (Drew) {E32903003}
.
.
Parts for a Rockwell 6x48 belt sander made in late 50's or early 60's. Need tilt table, wood fence and Idler drum guard. Vernon, NY, US. dteeps@44twcny.rr.com (David) {E30903001}
See Anti-Spam Code

Parts for a Craftsman 9" Table saw. 
Model # 103.20000. Need gears and gear trunion  9 in table saw. Oriental, NC, US. poppop@cconnect.net (Don) {E30603002}
.
Parts for a for a Craftsman 12" bandsaw.  Need lower saw guide assembly and a guide holder stud  103.24280 or 103.24260. Amherst, NY, US. joshfeldmann@44hotmail.com (Josh) {E30603001}
See Anti-Spam Code
Parts and info for an Atlas Lathe. 
Looking for belt cover, chucks, tool rests, other info. Anchorage, AK, US.  chking@44chugach.net (Cheri) {D30703003}  See Anti-Spam Code

Parts for a Craftsman - King-Seeley 8" Saw.  
Mod #103.23832. Thanks. Gerber, GA. US. shannarasdruid@yahoo.com (Marty) {D30703002}
.

Rip Fence for 12" Montgomery Wards Table Saw. Menahga, MN, US. tcrafts2003@yahoo.com (Traci) {D30703001}
Looking for parts for a Delta Drill Press, Model DP220. Need chuck, spindle, etc. Louisville, TN, US. dutchman@chartertn.net (Rob) {C33003015}

Parts for a Sears Craftsman / King Seely Bandsaw model 103-0103.  Looking for lower blade guide , a copy of the owners manual, and/or an exploded diagram. hal@sitespecific.net (Hal) {C33003014}
.
Dovetailed shaft blocks (2) for Newton BA100 horizontal boring machine Ser # BA72443. Greensboro, NC, US. rawleighwoodworking@44hotmail.com (Bill) {C33003013}  See Anti-Spam Code

Blades for Montgomery Wards Powr Kraft variable scroll-sabre saw Model TWH-8919a. Sacramento, CA, US. rtatar@caartscouncil.com (Ray) {C33003011}
.
Electric motor for a Dewalt radial arm saw. -has a "1" shaft and uses a 14" to 16" saw blade. circa 45 to 65. model. 220 volt-3 phase, 3 to 5 hp?.  Alexander City, AL, US. ddykes@webshoppe.net (Don) {C33003010}
I am looking for parts for a 12" AMT Table Saw. Model No. 4582 Willing to pay.  Thank you.  Margareville, NY, US. straut@catskill.net (Hollice) {C33003009}

Looking for an owners manual for a Craftsman 6" Jointer model # 113.20621 or somewhere to download. Umatilla, FL, US. rossbotix46@yahoo.com (Doug) {C33003008}

Lift crank kit for 2 1/2" column Drill Press (older Craftsman).  Kit was sold as add-on by Sears. Arlington, TX, US. 4thstooge@attbi.com (David) {C33003002}
.
Need owners manual for Wards Power-Kraft 10" radial arm saw Model#TPC 2610A. & Chicago Industrial Tool 5 speed drill press, model#G-14-5. Chandler, TX, US. jdsatterfield26@44aol.com (Jerry) {C31703011} See Anti-Spam Code

Looking for a miter guage to fit Delta Milweukee band saw. Circa 1949. Belmont, CA, US. w6nuc64@44aol.com (Dave) {C31703010}
See Anti-Spam Code
Cutter Guard for Sears Crsftsman or Walker-Turner 6" Jointer 102.05600.  Vintage late 30s or early 40s. Thanks. Ho HO Kus, NJ, US. haaahooo@aol.com (Keith) {C31703009}

Operators manual for a 10" Craftsman Tablesaw. Model # 113.27610. Vintage possibly sometime in the 1950`s. Cedar Bluff, VA, US. dakota114@hotmail.com (Johnny) {C31703006}
 2 tool rests for a Powermatic 90wood lathe & 2-live centers.  also looking for a brake arm for a
Powermatic 21 band saw. Seneca, PA, US.  beths@csonline.net (Beth) {C31703003}
Operators & parts manual for Atlas 10" Tilting arbor floor model saw. mod  3180. Staten Island, NY, US. atralongo1@si.rr.com (Phil) {C31703002}
.

Parts for an Atlas scroll saw,  Model 4011 s/n 018886. Need "1/4 round Jaws' for clamping blade. Canton, CT, US. ppoppa@attbi.com (Edward) {C31703001}

Manual +/or info about an American 30" Driveline Bandsaw, Model B30, including conversion. Lousiville, CO, US. treehouse54@44yahoo.com (John) {C31003007} See Anti-Spam Code
Manual for a 16" Delta Scroll Saw 2 speed. Spur, TX, US. norris@caprock-spur.com (Alicia) {C31003006}
.

Table inserts for a Rockwell 12-14 Table Saw. Want regular insert,Dado insert and other parts also. Agat, GU, US. talisay@44kuentos.guam.net (Steve) {C31003003} See Anti-Spam Code
Parts for a Buffalo Model 15 Drill Press -circa 1940'. In search of the shaft and bearings for the slow speed attachment. Fairfield, CT, US. rmagliocco@na.ko.com (Ron) {C31003002}

Manual or copy of Owner's Manual for 16" Craftsman Scroll Saw model 315.216360. Maruri, Spain. edolea@44jazzfree.com  (Eduardo) {C30203014}  See Anti-Spam Code
Parts for an Atlas 10.5 inch tilting arbor tablesaw.  Need both trunions for the arbor support. Canton, CT, US. ppoppa@44attbi.com (Edward) {C30203013}
See Anti-Spam Code
Saw Guard Assembly for  Craftsman 8 inch tilting arbor bench saw, model 103.22161 
Same guard as for other 8 inch TA bench saw. jpeplow@44attbi.com (Joe) {C30203012}
See Anti-Spam Code

Looking for sanding belts 56" long x 4" wide for a Walker Turner sander.  Thank you. Edinboro, PA, US.  salthof@edinboro.edu or call 814-732-2218. (Susan) {C30203009}
.

Spindle Sleeve for 14" Delta Drill Press Model # PM-1526. PN DP-264. Mount Dora, FL, US. eweaver@chbs.org (Eli) {C30203006}
Looking for blades for a Rockwell Planer Model - 22-101. Counce, TN, US. bfondren@44charter.net (Bob) {C30203004}  See Anti-Spam Code

Looking for belts for a Shopmate 4" X 21.75" belt sander. rabell1642@44netzero.net (Bob) {C30203003}  See Anti-Spam Code
 .
Looking for a complete return spring assembly for a Atlas bench drill press, model 54. And operators - parts manual or copies if possible. Staten Island, NY, US. {B31303008} FOUND

Looking  for a Motor for a Wards powercraft 9" Table Saw, #37X-25361. Cainsville, MO, US. blouos@yahoo.com (Leroy) {B31303007}
.
Switch for a Black & Decker Utility Drill. U-127 1/2". 1/3 HP  Type E or F. Dushore, PA, US. oldfarm@44epix.net (Philip) {B31303006}
See Anti-Spam Code

Switch for a Black & Decker Utility Drill. U-127 1/2". 1/3 HP  Type E or F. Dushore, PA, US.  {B31303006}  Parts no longer needed.
I need rack and pinion fence for Oliver saws 232,270,260 or 88.  Will consider all. DeKalb. IL, US. loktr@aol.com (Ben) {B31303005}
Need raising/lowering gears for 1942 sears robc. Table Saw. model# 101.02143. part #'s S8-9A and S8-43. or complete saw in good cond. Cocoa Beach, FL, US. sevenmetallyons@44earthlink.net (Kelly) {B31303003} See Anti-Spam Code
Looking  for a Tail Stock for 12 in. Delta/Rockwell Lathe from the fifties. Jackson, MI, US. flowerpoker@aol.com (Howard) {B31303001}
.
.

Tires for a 14" Walker TurnerVertical Band Saw. 14" X 1 1/4" rubber tires.   Oakland, CA US. palmerjc@pacbell.net (Jack) {B30603003}
.
Fence & miter slide for Montgomery Wards 14" Bandsaw - Power Kraft. Fair Oaks, CA, US. danirae@44earthlink.net or call 916-965-5478. (Paul) {B30603002} See Anti-Spam Code  

Parts for a Powermatic #63 Artisan's Saw.  Need front bracket #6285228 or Purching info. Fair Oaks. CA, US.  danirae@44earthlink.net or call 916-965-5478. (Paul) {B30603001} 
See Anti-Spam Code  
Looking for a bevel pointer for a Dewalt or Black & Decker 7740 Powershop Radial Arm Saw. Both machines are the same. Edmonton, AB, Canada. kube1@shaw.ca (Travis) {B30503014}

Instructions or manual for a Craftsman 4"  Extension Jointer (103.21800). It bolts to the right side of a 50's vintage 8" Craftsman Table Saw. Lawrenceburg, IN, US. fouryorkies@44yahoo.com (Dale) {B30503013}  See Anti-Spam Code  
Seeking Delta Jet-lock rails & fence for Delta contactor saw 34-444. Portland, OR, US. kurtm@pdx.edu (Kurt) {B30503008}
.
.

Looking for a fence for a Porter 16" Jointer. Plainfield, IL, US. mphee@jump-technologies.com (Martin) {B30503007}
.
.
Parts for a Craftsman-King-Seeley scroll saw. #10323440. Need Preloading spring #23729-52, leather washer #23833-64, washer #23737-53,and washer countersink #23717-48. Bay City, MI, US. wjmeagher@aol.com (Bill) {B30503005}

Fence and miter gauge for Yates American 16" Band Saw. Detroit, MI, US.   errplane@aol.com (Larry) {B30503004} 
Miter Guide for Walker Turner 7" Driver  tilting table saw.  Detroit, MI, US.   errplane@aol.com (Larry) {B30503003}

Need brushes for 7 1/4"Powr-Kraft circ.saw. 1 1/2 hp. Model TPC-8113A SN. 178. Brush # 535. cgilbert@44molalla.net ( Gary) {B30503001}
See Anti-Spam Code  
Parts for a Walker Turner 900 Series Drill Press circa mid-1940's. I need the spindle cover and a belt cover. Thanks! Henderson, NV, US. abendshien@aol.com (Jeff) {A32603002}
I am looking for a 1/2" spindle for a Delta Shaper. model 43-122.  Not the standard spindle but the one that holds router bits. Cincinnati, OH, US. sgruber@fuse.net (Steve) {A32503013}

Looking for a Belt for a Powr Kraft Hand Planer model # TWH8985.  Belt #93-A-47. St. Helen, MI, US. shanemohnke@msn.com (Shane) {A32503012}
.

Band saw parts for a - 1987 10" item #90181 need table, U shaped bracket for angle adjustment and saw blades. Rivrtside, CA, US.  mrsghostcat@hotmail.com (Linda) {A32503011}  
Lock nut for a Craftsman Router, model number 315.17380, part number 1-623793-01. Pine Island, MN, US. kibo2@ix.netcom.com (Norm) {A32503010}

Looking for a digital readout control assembly for a Craftsman digital Rrdial Arm Saw.  Model number 113.197410.  Part number 815741. Carrollton, GA, US. SWKittredg@aol.com (Steve) {A32503008}
Parts for a Montgomery Ward Wood Lathe model 14FD637A. Need chucks and a tool rest. egiles@centurytel.net (Emory) {A32503007}
.

Manual or copy of Manual for Craftsman Scroll Saw model # 103.23151. Wauwatosa, WI, US. pwalker2@wi.rr.com (Peter) {A32503005}
Owners manual for Brodhead Garrett J-line Jointer. 1960's era. McDonald, PA, US. gchartz@msn.com (Gary) {A32503002}
Looking for fence assembly for Crafsman 6" Jointer Model# 103.23320.  Terre Haute, IN, US. bcpugh@att.net (Brad) {A32503001}
.

Roller Feed Gear Box for Penn State Ind. 12.5" Super-125 Thickness Planer and any other available parts. Minneapolis, MN, US.  jimjob@qwest.net (Jim) {A31803004}

Parts and blades for a Boice Cable Scroll Saw. Sabula, IA, US. rickd@greaterdubuque.org or call 563-557-9049. (Rick) {A31803003}
.
.
Looking for Rockwell/Delta Blade Shear #28-005 for a BS-025 bandsaw blade welder.  also, 2 #882 work lights. thanks.  Millville, NJ, US. BillRuNarv@aol.com or call after 6pm 1-856-327-5779. (Bill) {A31803002}

Parts for a Craftsman 10" Table Saw model 113.27520. Looking for a splitter/guard assembly, owners' manual, or any info re: parts on this machine. Silverdale, WA, US. hfoxj@charter.net (Chris) {A31803001}
Tail Stock for a Powermatic model 90 Lathe. Wichita, KS, US. kenratcliff@onemain.com (Ken) {A30203001}
.
.

Parts for a 1948 Delta 14" Drill Press. Need rear pulley guard and parts to attach it to the front guard. Bristol, RI, US. {X23003004} Parts located.
.
.
.
Parts for a Sears Craftsman (Atlas) 12" wood-turning Lathe, circa 1936 Need tool rest holder (p/n L3-25) and 12" tool rest (p/n L3-26).  Also any other accessories for same lathe. Apple Valley, MN, US.  meylk@44aol.com (Craig) {X23003002}
See Anti-Spam Code  

Looking for an Owners Manual, original or copy for a Craftsman Jointer Model # 103.23321. Milwaukee, WI, US. pwalker2@44wi.rr.com (Peter) {X23003001} See Anti-Spam Code  
Parts for a Walker Turner 14" Vertical Band Saw. Looking for Guide bearings \ rollers (mushroom w/stem).  Plymouth, NH, US. ssargent@together.net (Sean) {X22703004}

Looking for motor assy.  for a Sears/Craftsman 6"planer/molder. #306.233811 prefer with good brushes. Mantua, OH, US.  mbscrib@aol.com (Matt) {X22703002}
Manual for a 15 AMT Thickness Planer.  Any help would be greatly appreciated. Meadville, PA, US. nwad@44alltel.net (Bob) {X22703001}
See Anti-Spam Code  

Parts for a Walker Turner 14" Vertical Band Saw. Looking for Guide bearings \ rollers (mushroom w/stem).  Plymouth, NH, US. ssargent@together.net (Sean) {X22703004}
Looking for motor assy.  for a Sears/Craftsman 6"planer/molder. #306.233811 prefer with good brushes. Mantua, OH, US.  mbscrib@aol.com (Matt) {X22703002}
Manual for a 15 AMT Thickness Planer.  Any help would be greatly appreciated. Meadville, PA, US. nwad@44alltel.net (Bob) {X22703001}
See Anti-Spam Code  

A complete Blade Guard Assembly for a Delta 9" Miter Saw Model # 34-010, type 2. Vin.about 1986. bb309xx@aol.com or call 570-823-2297. Plains, PA, US. (Bob) {X22103006}
Parts for a Delta wood lathe 46-305. Need manual, live center and tool rest. Tonica, IL, US. ifixit@nabbnet.com (Bob) {X22103005}
.

A complete Blade Guard Assembly for a Delta 9" Miter Saw Model # 34-010, type 2. Vin.about 1986. bb309xx@aol.com or call 570-823-2297. Plains, PA, US. (Bob) {X22103006}
Parts for a Delta wood lathe 46-305. Need manual, live center and tool rest. Tonica, IL, US. ifixit@nabbnet.com (Bob) {X22103005}
.
.

Looking for Operating Manual for Craftsman/ King Seeley Bench Saw. Model 103.22180. Vin.1950's. rhuss@44stephens-adv.com or call days 913-661-0910. (Ray) {X22103001}
See Anti-Spam Code  

Owner operator manuals & parts list for a Powermatic Lathe, model #90, serial #1-3010. Also for Delta Milwaukee 24" Scroll saw. AF09(608)30305 AO 8623. Copy or original. Thanks! Chicago, IL, US. tr1angulum@hotmail.com (Nicole) {X21603003}
Looking for owners manual for a Craftsman 12" Bandsaw. Model 113.243410. Highland, IN, US. 
Parts Located. {X21603002}
.
.
.

Looking instruction manual and rubber tires for Craftsman 10" Bandsaw, model number: 135.244200. Wheaton, IL, US.  antonsgold@yahoo.com  (Edgar) {W21403003}
Looking for a used Delta 46-408 or Vega Pro wood lathe Duplicator. Must handle lengths of 36". St. Charles, IL, US. p.w.sum@att.net (Paul) {X21403002}
.

Lathe Duplicator, Preferably a Vega pro 36 or better.  Power feed?  Looking forward to your response.  Sunset Hills, MO, US. jboeg@charter.net (Mutt) {X21303016}
Ball Bearing Center for tailstock for a Rockwell 14/11 Wood Lathe Model 46-111 or 46-150. DSSchw@44aol.com (Dan) {X21303014}
  See Anti-Spam Code  
Source for feed wheels for a Weinig Profimat 22N Moulder. RGodboldt@heritagecustommillwork.com (Rick) {X21303013}
Chuck for Rockwell Drill Press Series 15-017  SN. 1570709.  vin 1965.  rbartoe@cfl.rr.com (Bob) {X21303012} 
.
Replacement Blades Wards PowerKraft 4" Jointer Model#:TPF 2514A.  mike@44duck-man.com (Mike) {X21303011} See Anti-Spam Code  
.
.
Looking for parts and manuals for Walker-Turner Drill Press. Mod. 1143-21. Unit is a two station bench mount. Apple Valley, Ca, US. 
bearvalleyfab@44yahoo.com (Jeff) {X21303010}
See Anti-Spam Code  
I need a belt for my Wards Powerkraft 9" Bench Saw.  model TCP2744.  Hurst, TX
crawfishjo@aol.com (Tilton) {X21303009}
.
.
Leather air cylinder diaphragm for an Oliver  Jig Saw. No. 173-E. The air cylinder
  blows the sawdust off the work piece. Signal Hill, CA, US. harmonshome@44aol.com (Terry) {X21303008} See Anti-Spam Code  

I'm looking for a replacement belt for a Montgomery Wards 10" table saw, model # 17x18534. Cazenovia, NY, US. wmcf@44alltel.net (Wayne) {X21303007} See Anti-Spam Code  
Idler drum bracket assy for Delta/Rockwell 6" Belt Sander.  I need the entire idler drum assy. Calypso, NC, US. parkstor@pdcn.net (Alan) {X21303005}
.
Rubber feeder roller for Turner wood Planer. 
Sun Prairie, WI, US. nnt_north@44yahoo.com (Mel) {X21303004} See Anti-Spam Code  
.

Motor Pulley for a Rockwell 46-200 Wood Lathe. 5/8 bore, 4 steps- 2"1/2, 3"  3"3/4 and 4"1/2. For V belt 1/2 wide. Montreal, Que. Canada. {X21303003}Parts Located

Looking for a headstock center for an older Sears wood lathe.  3/4" shaft.   Ft. Riley, KS, US.  s_vanhoveln@hotmail.com (Frank) {X20503002}


Need instructions and/or parts list for Wards Powr Kraft Radial Arm Saw. Model 2610A. Mt Vernon, IL, US. harcfh@mvn.net (Frank) {X20503001}
=============================== ===============================
Copyright ©2000 A&A Woodworking Machinery Classifieds All rights reserved